Hardware Overview
Reset
Button
Ethernet
Port
Power
LED
GPS Antenna
Connector
GPS Antenna Connector
This is used to connect the included
GPS Antenna.
Power LED
The LED will light blue when the device is
connected to a power source.
Ethernet Port
This Gigabit Ethernet port is used to connect
the power and should be connected to the LAN and DHCP
server.
Reset Button
To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the PrismStation
is powered on. Alternatively, the PrismStation may be reset
remotely via a Reset button located on the bottom of the
Gigabit PoE Adapter.
Release Button
To remove the attached horn, rotate the horn
counterclockwise while depressing the Release Button.
Release
Button
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]