Hardware Overview
Bottom View
Cable Door
Rear Housing
Technology
Ethernet Port
Release
Button Slot
Dish Bracket
Release Button
Dish
Reflector
Alignment Pins
Reset Button
Antenna Feed
Reset Button
To reset to factory defaults, press and hold the
Reset
button for more than 10 seconds while the PowerBeam is
already powered on.
Release Button
After you assemble the PowerBeam, check
the
Release
button; it should be fully engaged in the
Release
Button Slot
of the
Rear Housing
. This ensures that the
Antenna
Feed
is locked into place. If you need to remove the
Antenna
Feed
, you must depress the
Release
button first.
