background image

RoHS/WEEE Compliance Statement

English

European Directive 2002/96/EC requires that the equipment bearing 
this symbol on the product and/or its packaging must not be disposed 
of with unsorted municipal waste. The symbol indicates that this 
product should be disposed of separately from regular household waste 
streams. It is your responsibility to dispose of this and other electric and 
electronic equipment via designated collection facilities appointed by the 
government or local authorities. Correct disposal and recycling will help 
prevent potential negative consequences to the environment and human 
health. For more detailed information about the disposal of your old 
equipment, please contact your local authorities, waste disposal service, or 
the shop where you purchased the product.

Deutsch

Die Europäische Richtlinie 2002/96/EC verlangt, dass technische 
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem 
Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall 
entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt 
von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es 
liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische 
und elektronische Geräte über die dafür zuständigen und von der 
Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu 
entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, 
potentielle negative Folgen für Umwelt und die menschliche Gesundheit 
zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer 
Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder 
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das 
Produkt erworben haben.

Summary of Contents for PowerBeam m5 iso PBE-M5-300-ISO





























Reviews: