Hardware Overview
Reset
Button
Ethernet
Port
Power
LED
Power LED
The LED will light blue when the device is
connected to a power source.
Ethernet Port
This Gigabit Ethernet port is used to connect
the power and should be connected to the LAN and DHCP
server.
Reset Button
To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the IsoStation
is powered on. Alternatively, the IsoStation may be reset
remotely via a Reset button located on the bottom of the
Gigabit PoE Adapter.
Release Button
The default horn antenna (beamwidth: 45°)
can be swapped out for an optional horn with a different
beamwidth. To remove the attached horn antenna, rotate the
horn antenna counterclockwise while depressing the Release
Button.
Release
Button
