20/1/23, 12:11
IS-5AC Quick Start Guide
https://dl.ui.com/qsg/IS-5AC/IS-5AC_EN.html
3/15
Power LED
Ethernet Port
Reset Button
Release Button
The LED will light blue when the device is connected to a power source.
This Gigabit Ethernet port is used to connect the power and should be connected
to the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the device is powered on. Alternatively, the device may be reset
remotely via a Reset button located on the bottom of the Gigabit PoE Adapter.
The default horn antenna (beamwidth: 45°) can be swapped out for an optional
horn with a different beamwidth. To remove it, rotate the horn antenna
counterclockwise while depressing the Release Button.
Hardware Installation
IS-5AC Quick Start Guide
