Back Panel
Power
Ground
Reset
Button
Description
Reset
There are two methods to reset the
EdgeRouter to factory defaults:
• Runtime reset (recommended) The
EdgeRouter should be running after
bootup is complete. Press and hold the
Reset button for about 10 seconds until
the eth4 LED starts flashing and then
becomes solidly lit. After a few seconds, the
LED will turn off, and the EdgeRouter will
automatically reboot.
• Power-on reset Disconnect power from
the EdgeRouter. Press and hold the Reset
button while connecting power to the
EdgeRouter. The port LEDs will light up in
sequential order. Keep holding the Reset
button until the LED on the last port starts
flashing, and then release the button.
Detail
Description
Ground
ESD grounding for enhanced ESD protection.
The ground wire and screw with washer
are not included (recommended screw size:
M3‑0.5 x 4 mm).
Power
Connect the Power Adapter.
