Ubiquiti AMPLIFI User Manual Download Page 43

Page: 43 / 52

AmpliFi User Guide

Chapter 10: Diagnose

Chapter 10: Diagnose

The

Diagnose

screen will check your WAN link, IP settings,

Internet connection, and MeshPoint status. A green check

mark indicates success.

WAN Link

The connection between the Router and modem

is checked.

IP Address

Displays the public IP address of the Router.

Gateway Address

Displays the IP address of the service

provider’s gateway router.

DNS Address

Displays the IP address(es) of the service

provider’s DNS server(s).

Internet Connection

The connection to the service

provider is checked.

MeshPoints Online

Displays the number of active

MeshPoints. If there is an issue, please ensure that each

MeshPoint is properly plugged into a power source.

Diagnose

Tap to run the diagnostic checks again.

Summary of Contents for AMPLIFI





















































Search results

Summary of Contents for AMPLIFI

Reviews:

Related manuals for AMPLIFI

Brands by name

Popular brands

Ubiquiti AMPLIFI, User Manual

Search results

Summary of Contents for AMPLIFI

Reviews:

Related manuals for AMPLIFI

Brands by name

Popular brands