45
Chapter 9: System Tab
AirRouter
HP User Guide
Ubiquiti Networks, Inc.
Speed Test
The Speed Test tool allows you to test the connection
speed between two Ubiquiti Networks devices that are
using firmware version 5.2 or above. It should be used
for a preliminary throughput estimation between two
network devices.
Select Destination IP
A remote system IP can be selected
from the list, which is generated automatically (Select
destination IP) or may be specified manually.
Remote system access credentials (administrator
username - User and Password) should be provided for
the communication between two AirOS-powered devices.
This is required in order to establish the TCP/IP based
throughput test.
Remote WEB port
The remote Web port the AirOS
powered device should be specified in order to establish
TCP/IP based throughput test (i.e. 443 port should be
specified if HTTPS is enabled in the remote system). The
ICMP throughput measurement routine will be initiated if
the WEB port of the remote system is incorrect.
Show Advanced Options
Enables additional Speed Test
tool options. There are 3 options available for the traffic
direction while estimating the throughput maximum:
Direction
There are three directions to choose from:
•
Duplex
Estimates the incoming (Rx) and the outgoing
(Tx) throughput at the same time.
•
Receive
Estimates the incoming (Rx) throughput.
•
Transmit
Estimates the outgoing (Tx) throughput.
Test Results
Displays three result categories:
•
Rx
Displays the estimated incoming throughput.
•
Tx
Displays the estimated out-coming throughput.
•
Total
Displays the aggregated throughput.
AirView
AirView is a Spectrum Analyzer allowing you to see the
crowdedness of the radio spectrum. You need to run
this tool on a system connected to the AirRouter HP via
Ethernet. All wireless connections will be disconnected
from the AirRouter HP.
AirView
Click Airview from the Tools menu to launch
AirView. On first use, the following window appears.
•
Do NOT warn me about this in the future
Select the
check box to bypass this window in future launches of
AirView Spectrum Analyzer.
Launch AirView
Click Launch Airview to download the
Java Network Launch Protocol (jnlp) file and complete
launch of AirView. Java Runtime Environment 1.6 (or
above) is required on the client machine to use AirView.
Close this window
Click Close this window to cancel
AirView launch and close this window.
Note:
Launching AirView will terminate all
wireless connections on the device.
Summary of Contents for AirRouterHP
Page 1: ......
