12. The antenna has an electrical downtilt of 2°. To further
adjust the elevation angle:
a.
©
Loosen the four Hex Bolts on the U-Brackets and the
nuts on the upper Pole Clamp.
b.
©
Slide the antenna to the desired tilt. (The brackets may
slide along the pole, depending on the angle of the
elevation tilt.)
c.
©
Tighten all bolts to 25 N · m and all nuts to 50 N · m or
less to avoid deforming the pole.
Serrated Flange Nut
and Hex Nut
Hex Bolt
Hex Bolt
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
