NanoStationM/locoM Series Quick Start Guide
https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]
Power LED
LAN1 LED
Signal LEDs
RP-SMA Antenna Connector
Main/LAN Port
Reset Button
The LED will light green when the device is connected to a power source.
The LED will light steady green when an active Ethernet connection is made to the
Main/LAN port and flash when there is activity.
In airOS®, you can modify the threshold values for the wireless signal strength LEDs on the
Advanced tab under Signal LED Thresholds. The default values are shown below:
Reserved for future use.
This 10/100 Ethernet port is used to connect the power and should be connected to the
LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10 seconds
while the device is powered on. Alternatively, the device may be reset remotely via a Reset
button located on the bottom of the PoE adapter.
