NanoStationM/locoM Series Quick Start Guide
https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]
Main/LAN* Port
Reset Button
Note:
To use PoE passthrough on the Secondary port, a 24V, 1A PoE adapter is
required.
This 10/100 Ethernet port is used to connect the power and should be connected to the
LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10 seconds
while the device is powered on. Alternatively, the device may be reset remotely via a Reset
button located on the bottom of the PoE adapter.
* The Main port is labeled LAN on the NanoStationlocoM2/M5.
locoM9
