Ubiquiti airFiber AF-11FX, User Manual

Page: 25 / 56

19
Chapter 4: Dashboard airFiber AF-11FX User Guide
Ubiquiti Networks, Inc.
(Ant Gain/Cable Loss) Displays the airFiber X radio’s
net antenna gain, which is the antenna gain minus cable
loss. Antenna gain (the gain of the antenna being used)
and cable loss (the loss in the cable from the radio to the
antenna, including approx. 1 dB due to the Duplexers) are
set using the
Antenna Gain and Cable Loss fields on the
Wireless tab.
Ethernet
MGMT MAC Displays the MAC address of the
Management port.
MGMT
Displays the speed and duplex of the
Management port.
DATA Displays the speed and duplex of the Data port.
DATA Cable Length Displays the Ethernet cable length
from radio to remote port. This is displayed only for cables
longer than 20 m.
DATA Pair 0 (Pins 1,2) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault (“open” or “short”) and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays “normal”.
DATA Pair 1 (Pins 3,6) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault (“open” or “short”) and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays “normal”.
DATA Pair 2 (Pins 4,5)
If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault (“open” or “short”) and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays “normal”.
DATA Pair 3 (Pins 7,8) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault (“open” or “short”) and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays “normal”.