Installation Overview
We recommend that you configure your paired airFiber radios before mounting. Below is an overview of the installation with specific details
on the following pages:
Connect Power over Ethernet to the DATA port, and connect an Ethernet cable between your computer and the MANAGEMENTport.
Configure the device settings in the airFiber Configuration Interface.
Once configuration is complete, disconnect the cables to move the airFiber radios.
Reconnect at the site.
After you have mounted the airFiber radios, establish and optimize the RF link.
Below is an image of the airFiber panel to view for establishing an optimized RF link.
