5
Hardware Installation
Installing a miniPCIe Card
1. Remove the two M1.6 screws from the bottom of the 3GStation
Professional. Slide off the front cover of the 3GStation
Professional by pressing down on it while holding the sides of
the back cover.
Slide down
Remove Screws
Note:
Be careful when sliding the door down not to
damage the on-board antennas.
2. Carefully lift the circuit board while holding it by the edges.
Summary of Contents for 3GStation Carrier
Page 1: ...3G to WiFi and Ethernet Bridge ...
Page 2: ......
Page 8: ...6 3GStation Professional 3 Unscrew and remove the RPSMA toTS9 cable ...
Page 23: ......
