UBI MaxiScan 3300, Installation Manual

Page: 35 / 82

5. Setting up your MaxiScan 3300
MS/3300/IG/10/E/970831 5-13
5. Configuration modes and utilities
The configuration inhibit after 1 minute option protects against
unwanted reading of configuration codes and greatly improves
reading performance for the "normal" bar codes in your application.
If you use a setup sheet for configuration and the configuration
inhibit after 1 minute option is selected, you must disconnect and
then reconnect the MaxiScan 3300 power supply to enable reading of
configuration codes.
You then have 1 minute to read a setup code (if you do not read a
code within 1 minute, the MaxiScan 3300 will leave configuration
mode and you will have to switch off and restart the MaxiScan 3300
again). Every new configuration code you read enables the MaxiScan
3300 to read another configuration code within 1 minute.
You have now created a setup for your MaxiScan 3300.
Choose File - Save as if you want to save your setup sheet (the filename you give must
have the extension .cfg).