UBI EasyCoder 601 – User's Manual
12
RIBBON LOAD
Pull out the used-up ribbon and the empty ribbon core.
1
3
5
6
4
2
Remove the front and right-hand doors.
Fold the locking handle downward/outward (1).
Then turn the printhead lift knob to “Load” position (2).
Load
2.
1.
Load
Press the ribbon roll onto the ribbon supply spool (1)
and thread the ribbon under the upper part of the print
unit. Pull out approx. 20 cm (8") of ribbon (2).
!
Be careful to thread the ribbon above the handle of the
label stop sensor! The ribbon must be fitted so the spools
rotate counter-clockwise, as illustrated above.
Unpack a roll of original UBI transfer ribbon.
The use of any thermal transfer ribbon, other than those
supplied by UBI, will invalidate the printhead warranty.
Load
1.
2.
1.
