UBI EasyCoder 601 XP – Service Manual Ed. 1
20
Chapter 3 Hatches and Doors
The front hatch gives access to:
• The front part of the print mechanism
• The paper cutter connector
• The optional label-taken sensor
The front hatch is fitted to the bottom plate by means of two hinges
of the same type as those of the right-hand door. The front hatch is
kept shut by a snap-lock and can be swung down almost to a vertical
position. The hatch can be removed from its hinges by pushing it to
the left until the snap-lock on the right-hand hinge disengages.
The front hatch can be replaced by an optional paper cutter unit, see
chapter 11.
Alignment is performed in the same way as the right-hand door, see
previous page.
The front hatch can be removed by pushing it to the left when open.
3.2 Front Hatch
Ready
Error
Power
EasyCoder 601 XP
3
6
8
9
.
7
Pause
Setup
Feed
Enter
2
1
0
C
5
4
F3
F4
F5
F1
F2
Shift