Operation
15
printed: 07/2023 Subject to change!
RoFryUserManual.docx
5.3.1 Cooking section
To operate the RoFry via the computer control, press the ON/OFF switch. The controller will start,
showing the manufacturer logo and will boot into the home screen.
Once the controller is ready, press the cooking sction key. Use the UP- and DOWN-key to scroll
through the list of programs. Start the desired program by pressing the corresponding key.
Follow the instructions on screen to preheat, load, unload etc. An accoustic alarm and the ready
message on screen indicate the end of the cooking process.Use the START key again, to quit the
alarm. (If automatic program start and/or end is activated in the user parameter section, opening the
basket will quit the alarm automatically and initiate the emptying of the food products from the
basket).
5.3.2 Cleaning section
Once the controller is ready, press the cleaning sction key. Use the UP- and DOWN-key to scroll
through the list of programs. Start the desired program by pressing the corresponding key.
Follow the instructions on screen to support the automatic self cleaning procedure.
5.3.3 Programming section
Once the controller is ready, press the programming section key
Enter the access code (factory default is 1965) and confirm
You can choose between:
New
to create a new cooking program
Change
to change an existing cooking program
Copy
(to copy an existing cooking program
Move
to move an existing cooking program to a different location in the list
Delete
(to delete an existing cooking program from the list)
5.3.3.1 New:
Select the position of the new cooking program in the list
Select a program from the library or create your own
+
Library
programs can be selected to the desired program position. They can be changed later on.
+
Cooking
programs are preset by the following steps:
- Select an Icon
- Enter a Name
- Set the reference time (00:00 means, that RoFry will detect the time during the first program run)
- Set the steam temperature (temperature during steam phase)
- Set the steam time (duration of the steam phase)
- Set the roasting temperature (temperature during roasting phase)
- Set the roasting time (duration of the roasting phase)
- Set the plus factor (to compensate quantity upward deviations)
- Set the minus factor (to compensate quantity downward deviations)
- Select Autostart yes or no (to emmediately start the program after basket push in)
- Select Autoempty yes or no (to emmediately start the emptying after basket pull out)
- Select Rotation yes or no (to run a program with or wothout basket rotation)
- Set the rotation delay (delayed start of basket rotation)
- Set the rotation intervall (pause between basket rotations)
5.3.3.2 Change:
Works the same way as New except for the fact, that the given data can be changed.
