ASSEMBLY INSTRUCTIONS:
OPERATING INSTRUCTIONS:
CLEANING AND MAINTENANCE INSTRUCTIONS:
1.
Unscrew three (3) Locking Screws from the bottom of the Fan Body.
WARNING: Do not use this fan before finish assembling the base
2.
Pass the Power Cord through the centre hole of the Fan Base, and
firmly snap the two halves of the Fan Base together.
3.
Secure the Fan Base to the Fan Body with the Locking Screws from
Step 1. Tighten the Locking Screws firmly.
4.
Place the Power Cord through the cut out on the bottom of the Fan Base.
Handheld Remote Control Unit
Your remote control unit uses one (1) button cell (type CR2032, supplied)
for operation. To replace the button cell, simply press the back of the
handheld remote control unit with your thumb to remove the battery cover.
Insert the button cell, and then replace the cover.
Set the Fan Base on a dry, level surface. Plug the cord into any standard
120 V AC outlet. The lighted screen on the Control Panel will start to glow
when the fan is turned on by pressing the ON/OFF button. The fan is
ready for use, and can be controlled by pressing the buttons on the
Handheld Remote Control or the Control Panel on the Fan Body.
1. ON/OFF
Button – Turn the fan ON or OFF by pressing this button.
2. SPEED
Button – Select the desired speed by pressing the Speed Button, which will cause the fan to
operate at Low, Medium or High speed. The lighted screen on the Control Panel will indicate the fan speed selected.
3. OSCILLATION
Button – To start or stop fan’s oscillation.
4. TIMER
Button –This fan is equipped with an automatic shut-off feature. To select desired operating time,
press the Timer Button several times, until the lighted screen displays the desired operating time
(from ½ hour to 8 hours in ½-hour increments).
6.
7.
LIGHT
Button (Only on the Handheld Remote Control) – To turn the built-in night light ON or OFF.
WARNING:
Always unplug from electrical supply source before cleaning.
Do not allow water to drip on or into the fan motor housing.
Cleaning
Use only a soft, damp cloth to gently wipe the outer surfaces of the fan clean. Do not use harmful cleaners. To clean
between the grilles, we recommend using a pipe cleaner, flexible dustwand, vacuum cleaner or compressed air to gently
User Maintenance
This fan is permanently lubricated, and will not require additional lubrication (oil) for the life of the fan. This fan
requires little maintenance, and contains no user-serviceable parts. Do not attempt to repair or adjust any electrical or
mechanical functions on this unit.
Fan Parts:
A. Control Panel
B. Lighted Screen
C. Fan Body
D. Night Light
E. Fan Base
F. Locking Screw
G. Power Cord
H. Handheld Remote
Control
5. MODE Button – Press it once, you can select AUTO mode and the sign “AUTO” will be on. At this mode, the fan
will select proper output automatically depending on the current room temperature and the system set temperature
(25
℃
). If room temperature is more than 25
℃
, the motor will operate, if room temperature is less than 25
℃
,
the motor will stop automatically. Press it again to select normal mode.
STYLE BUTTON --to select normal mode, or sleep mode.
remove the dust.
3
