7
ELECTRICAL WIRING
MAINTENANCE
• In order for the warranty to be valid, the unit must be cleaned regularly.
Cut off power supply at circuit breaker/fuse before cleaning the unit. Use a soft rag for
dusting. When cleaning, use only a damp rag and non-abrasive dish soap. Do not use
abrasive or chemical cleaners because they may damage the finish. If the unit is used
in a very dusty location, use a vacuum brush regularly to remove dust and other
foreign objects from the grilles. Note that cigarette smoke could yellow the discharge
grille and that the best way to prevent it is to clean the unit on a regular basis.
• The heater must be installed by a certified electrician and in accordance with the
local and national building codes.
• In Canada, the installation of this product must be carried out by a qualified
electrician.
• This convection heater is to be used on a 240(CD1)V AC power supply and grounded
outlets.
240
240
HEATER
ELEMENT
TEMP CUT-OUT
GROUNDING
SWITCH
3334W
1667W
INDI CA
TOR LINGHT
L1
L2
Summary of Contents for 68125104
Page 12: ...11 SCHEMATIC DRAWING SCHÉMA ...
