Fig. 6:
Insert the hook (M) into the large top
connector (I), then insert the long middle beam
(E) and short middle beam (F) into the pipe of
the large top connector (I).
Fig. 7:
Attach the middle beam down tube
(E/F) to the middle beam down connector (G)
with a screw (EE), flat washer (BB), and nut
(DD).
Fig. 8:
Insert the
curved
beam (D)
into the
curved
beam down tube
(H).
Fig. 10:
Attach the curved beam
down tube (H) to the U-chip of the
post (A) with a screw (EE), flat
washer (BB), and nut (DD).
Fig. 9:
Insert one side of the
curved
beam (D) into the pipe of
the large top connector (I).
Fig. 11:
Insert the small top
curved
beam (J) into the small
top connector (K).
Fig. 12:
Put the small canopy
(R) on the small top, then
attach the four corners of the
small canopy to the small top
curved
beam (J).
Fig. 13:
Attach the finial (L) to
the small top connector (K).
