Fig.3:
Attach base protector (H) to post 1&2 (E&F), attach post base (G) to post (E&F)
with a
bolt (DD) and washer (BB)
Fig.4:
Place
small connector (L) onto guideway bar (N) through the bottom of guideway bar (N).
Fig.5:
Insert guideway bar (N) into small connector (L)
located
on the top of post 1&2 (E&F), then attach them
with a
bolt (AA)
and washer (BB).
Fig.6:
Attach the bottom of guideway bar (N) to small connector (L) that is on post 1&2 (E&F) with bolt (AA) and washer (BB).
Fig.7:
Attach post 2 (F) to corner connector 1/2 (C/D)
with a
bolt (AA) and washer (BB).
Place
for post 1 (E).
Fig.8:
Attach the top of arch support frame 1&2 (I&J) to fixed beam (B) and support bar (B1) with a bolt (AA) and washer
(BB).
Fig.9:
Attach the bottom of arch support frame 1&2 (I&J) to post (E&F) with a bolt (AA) and washer (BB).
Fig.10:
Put canopy (O) on the top of the pergola, then insert the assembled beam (M) to the hemline of the canopy.
Fig.11:
Attach small connector (L) to beam (M) with a bolt (DD) and washer (BB).
Fig.12:
Anchor the assembled pergola to the ground with stakes (FF). Your pergola is now fully assembled.
Fig.13:
When pulling down canopy (O), make sure it is secured in place with clasp (K) on the post (E&F).
