4
Step 1
：
Pass a screw (AA) through one
end of the seat (D) to connect with arm
1 (C). Tighten with flat washer (DD), nut
(EE) and plastic cover (HH). Repeat for
arm 2.
Step 2
：
Pass a screw (BB), flat washer (DD), nut
(EE) and plastic cover (HH) to connect the back
(A) and arm 1 (B). Repeat for arm 2 (C).
Step 3
：
Place bench on the side. Use a
bolt (FF) to connect the connector (E)
with seat (D). Repeat for second
connector.
Step 4
：
Pass screws (CC) through arm 1 (B) and
support beam (F) and attach with flat washer
(DD), nut (EE) and plastic cover (HH)
– see
Fig.4. Use bolts (FF) to connect support beam
(F) and seat (D) - see Fig.5. Use the same
procedure to connect arm 2 (C), support beam
(F) and seat (D).
