Fig.6-2:
Insert hook (M) into
large top connector (I), then
insert long middle beam (E2)
and short middle beam (F2) into
pipe of large top connector (I).
Fig.7:
Attach middle beam down
tube (E1) to middle beam down
connector (G) with screw (FF), flat
washer (BB) and nut (EE).
Fig.8:
Insert
curved
beam (D)
into
curved
beam down tube
(H).
Fig.10:
Attach curved beam down
tube (H) to the U chip of post (A1)
with screw (FF), flat washer (BB)
and nut (EE).
Fig.9:
Insert one side of
curved
beam (D) into pipe of
large top connector (I).
Fig.11:
Insert small top
curved
beam (J) into small
top connector (K).
Fig.12:
Put small canopy (R)
on small top, then attach four
corners of small canopy to
small top
curved
beam (J).
Fig.13:
Attach finial (L) to
small top connector (K) with
flat washer (JJ).
Fig.6-1:
Insert long middle beam
(E2) into middle beam down tube
(E1). Insert F2 into E1.
