Page 2
Installation
Note: Product may not look exactly as on diagrams.
Corresponding parts on list indicated by (#).
1. Threaded rod
2. Mounting back plate
3. Marrettes x 3
4. 8/32 screws x 2
5. Fixture (#)
6. Cap nut
7. Inside glass x 3 (#)
8. Outside glass x 3 (#)
9. Outside glass strutting pieces x 12 (#)
1.
ENSURE POWER IS TURNED OFF! TURNING OFF THE
WALL SWITCH DOES NOT MEAN THAT THERE IS NO
ELECTRICITY IN THE CIRCUIT. TURN THE POWER OFF AT
THE BREAKER BOX!
Attach the (2) mounting bracket to the electrical box in the wall
using x2 (4) 8/32 screws provided with your fixture.
Attach the (1) threaded rod to the electrical box through the
bracket.
2.
Connect the black wire from the fixture to the hot wire in the
electrical box using the
(3) marrettes
provided. Connect the
white wire from the fixture to the neutral wire in the electrical box
using the (3) marrettes provided. Make sure no copper is
protruding from the ends of the marrettes, or use electrical tape
to cover over any exposed copper.Connect the ground wire
(bare copper) from the fixture to the ground wire in the electrical
box using the (3)marrettes.
3.
Carefully place the fixture over the
(1) Threaded rod
protruding from the
(2) Mounting back plate
. Ensure no wires
are protruding from the fixture or pinched between the fixture
and the wall.
Secure fixture in place using the (6) cap nut
provided.
4.
Add
(7) Inside glass shades
and then attach the
(9) Outside
glass strutting pieces
. Add the
(8) Outside glass
.
Max 60 watt bulbs; higher wattage could result in a fire
hazard.
Your installation is now complete. Restore power and enjoy your
new fixture.
Warranty
Thank you for purchasing this UBERHAUS product. These
products have been made to high-quality standards and are
guaranteed for 1 year against domestic use against
manufacturing faults.
This warranty does not affect your statutory rights.
In case of any malfunction of your UBERHAUS product (failure,
missing part, etc.), please contact one of our service technicians
at our toll free service line at 1-866-206-0888 from 8 AM to 6
PM, Monday to Friday, Eastern time. RONA reserves the right to
repair or replace the defective product, at its discretion.
The product is guaranteed for 1 year if used for normal trade
purposes. Any warranty is invalid if the product has been
overloaded or subject to neglect, improper use or an attempted
repair other than by an authorized agent. Heavy-duty or daily
professional/commercial usage are not guaranteed. Due to
continuous product improvement, we reserve the right to change
the product specifications without prior notice.
