6
Assembly of Juice Extractor
BEFORE FIRST USE:
After unpacking the Juice Extractor from the packaging, be sure to wash
all components with warm soapy water, with the exception of the motor base. Rinse and dry
components immediately. Never immerse the motor base in water or other liquids. To clean the
motor base, wipe with a damp sponge.
1.
Place strainer bowl on top of the motor base, and ensure that the bowl locks
in place. Carefully place the stainless steel strainer basket inside of the
strainer bowl. Ensure that the strainer bowl latches into position firmly.
2. Place the juicer cover over the strainer bowl, positioning the feed chute
over the strainer basket and lower it into position.
3. Raise the locking arm over the juicer cover until it latches into place.
4. Place the pulp container into position by tilting the position slightly to align
it properly with the juicer cover.
5. Place the juicing jug under the juice spout, ensuring proper contact
between the spout and the juicer jug to avoid any juice spills.
6. Slide the pushing rod down the feed chute by aligning the groove in the
food pusher with the small ridge on the inside of the top of the feed.
7. To minimize cleanup time, place a plastic bag inside of the pulp container
to collect the pulp.
