Ubee DDC2700 Subscriber User Manual Download Page 25

Page: 25 / 89

Ubee Interactive

4.1.3 Modem - Downstream

DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010

4.1.3

Modem - Downstream

This section explains how to use the

Downstream

screen of the web interface. The

Downstream

screen displays detailed information on the device’s connection to

downstream channels from the service provider.

1. Access the web interface. Refer to

page 14

, if needed.

2. Click the

Modem

link from the top menu and then the

Downstream

link from the

left side of the screen. Field explanations are listed below the following screen
example.

Label

Description

Downstream Lock

Displays if the cable modem succeeded in locking to a
downstream channel (Locked/Not Locked).

Downstream Channel ID

Displays the downstream channel ID.

Downstream Frequency

Displays the downstream channel frequency on which the
cable modem is scanning.

Downstream Modulation

Displays the modulation method that’s required for the
downstream channel to lock on to by the cable modem.
This method is determined by the service provider.

Downstream Symbol Rate

Displays the symbol rate. The current cable modem
downstream symbol rates are: QAM64 is 5056941
sym/sec, QAM256 is 5360537 sym/sec.

Downstream Interleave
Depth

Displays the current cable modem downstream Interleave
depth (4/8/16/32/64/128/other).

Downstream Power Level

Displays the receiver power level after ranging process.

Downstream SNR

Display the SNR of this downstream channel.

Refresh

Click this button to refresh the active screen data.

Summary of Contents for DDC2700


























































































Search results

Summary of Contents for DDC2700

Reviews:

Brands by name

Popular brands

Ubee DDC2700, Subscriber User Manual

Search results

Summary of Contents for DDC2700

Reviews:

Brands by name

Popular brands