17
Fig. 7. Location of the capacitor
8.2. Defrosting and cleaning
•
Strong icing of the inner walls can lead to a decrease in productivity
and deviation of temperature readings.
•
Defrosting is recommended when the frost layer exceeds 10 mm.
•
The formation of frost (icing) depends on the environmental
conditions at the place of installation (humidity) and on how the
equipment is used (frequent openings or an open lid). Thin layers of
frost should be scraped off with the included plastic ice scraper.
•
Hot steam and water under high pressure or high temperature can
damage electrical insulation, electronic parts and the refrigerant
circuit. Therefore, do not use hot steam, high temperature or high
pressure water.
Summary of Contents for Frost Stream Freeze
Page 1: ...0 ...