UBC AURA, Operating Manual

Page: 44 / 54

44
www.beer-co.com
AURA
13. CLEANING OF THE CONDENSER
During the product operation, a layer of dust is formed on the condenser that impedes the rejection of heat and leads to
reduced refrigerating capacity of the refrigerated display cabinets. The severe contamination of the condenser results in a
serious breakdown. Clean the condenser regularly (the frequency of cleaning depends on dust conditions of the room where
the product is located).
ATTENTION! If a non-serviceable condenser is installed in the refrigerated display cabinets, it must be cleaned
as part of maintenance.
Remove the protective grill to inspect the condenser and unit compartment. If any damage of the surfaces or pipes has
been detected, contact your service provider to eliminate the condenser faults. Clean the condenser carefully. Using a firm-
bristled (non-metallic) brush and vacuum cleaner, remove all possible dust formations taking care not to damage the heat
exchanger.
After cleaning and inspection, install the removed elements in their places and fix them firmly.
DO NOT clean the condenser with a jet of water.