UAV-1003598-001 Rev B
ECCN7A994
21
7.6 Mounting Unit
The tailBeaconX-EXP unit must be electrically connected, then installed
into the Mounting Plate by aligning the mounting tabs on the tailBeaconX-
EXP with the cut-outs in the Mounting Plate. This requires you to rotate the
unit 12deg from vertical before inserting. Once inserted fully, rotate
Clockwise to vertical and secure with M2 anti-rotation screws.
DO NOT
FORCE ROTATION, tailBeaconX will rotate with little resistance
6. Insert tailBeaconX-EXP into the Mounting Plate and twist clockwise to
the vertical position, ensuring that the tailBeaconX-EXP is oriented
consistent with the installation arrow on the label.
7. Secure the tailBeaconX-EXP to the Mounting Plate using the two
supplied M2 anti-rotation screws and a 1.5mm hex driver.
