UAV-1006203-001
Page
12 | 25
8.1.3 Connections
Connect SkyLink GRS to the SkyLink Hub and connect the Hub to a POE++ switch with
network access. Ensure that the two directional antennas or RF loads are attached to
both RF ports on the GRS before powering on.
Figure 5 - SkyLink GRS Connections
The SkyLink GRS connects to the Hub with the provided LEMO harness. Table 1 below
shows the connector pinout.
Table 1 - SkyLink GRS Pinout
Pin
Type
GRS
Hub
LEMO 1M.308
1
GND
2
NAV
IN
OUT
3
CTRL RX
IN
OUT
4
CTRL TX
OUT
IN
5
PWR
24V
24V
6
USER RX
IN
OUT
7
USER TX
OUT
IN
8
PPS
IN
OUT
