UAV-1006630-00
ECCN 7A994
Page
9 | 10
REV A
Description of accessories and components, which allow the radio
equipment to operate as intended and covered by the DoC: SkyEcho 2 to
be used in conjunction with tablet running EFB APP like SkyDemon,
EasyVFR, Foreflight Mobile, and others.
6.4 Country Specific Configuration Items
The following configuration items augment the configuration instructions
found in the SkyEcho Installation and Pilot’s Guide with UK specific
information.
6.4.1 Transmit Control
Transmission must be deactivated when used on an aircraft with an air
traffic control radar beacon system (ATCRBS) Mode-S transponder which
has ADS-B OUT enabled.
6.4.2 Receiver Mode
The SkyEcho contains dual receivers. The primary receiver is permanently
configured for 1090MHz ADS-B. The secondary receiver can be
configured for either 978MHz UAT ADS-B, or 868.4MHz FLARM®
reception (European frequency only). Only one option can be selected.
When selecting UAT, SkyEcho will be able to receive 978MHz UAT ADS-B
weather and traffic information if available.
When selecting FLARM, encrypted FLARM data is received and
transmitted to the EFB application for processing. Specific FLARM
functionality is dependent upon the EFB functionality implemented.
6.4.3 Aircraft Address Programming (ICAO Address)
The ICAO address is a 24-bit number issued to the aircraft by the
registration authority of the aircraft. These addresses are usually written as
a 6-digit hexadecimal number, although you may also encounter one