27
UAV-1001006-001
ECCN 7A994
uAvionix SkyFYX
115200
NMEA
Accord Micro-i
115200
NMEA
Garmin GPS-20A
9600
ADSB+
Garmin GNS 4xxW
9600
ADSB+
Garmin GNS 5xxW
9600
ADSB+
Commit and Confirm Configuration
1. After entering the correct information for all fields press Update. You
should receive a message confirming the configuration. Tap OK.
2. Tap
“Monitor” just below the Echo logo. Confirm the ICAO, Callsign
and Emitter shown are the correct values for your aircraft.
3. Programming of the echoUAT is now complete.
9 Normal Operation
9.1 Electronic Flight Bag Application
Launch your GDL 90 compatible Electronic Flight Bag (EFB) application.
Configure your EFB as necessary to access the uAvionix ADS-B device. In
most applications, it will be automatically detected. If you do not see a
device connection for the echo, ping, or uAvionix, please contact your EFB
provider for additional support. ADS-B traffic and flight information should
begin streaming to the application when in range. Depending on the
proximity to the nearest ADS-B ground station, FIS-B data (METARs,
TAFs, TFRs, etc) may not be available while on the ground.
Summary of Contents for echo
