UAT ADSL USB NIC, User Manual

Page: 17 / 21

Installation Guide For UAT ADSL USB Modem
16
DSL Information
Field Description
ADSL Standard ADSL Standard (ANSI T1.413, G.DMT, G.LITE, Multi-Standard)
Transmit Rate Upstream data rate negotiated by DSL link (Kbit/s)
Receive Rate Downstream data rate negotiated by DSL link (Kbit/s)
CRC Number of errors per second since training
Margin Near end (CPE) current SNR margin (dB)
Attenuation Current attenuation (dB)
VID-CPE Vendor ID of the DSL ATUR
VID-CO Vendor ID of the DSL ATUC
FEC Number of uncorrectable errors since start of link
ATM
Information Field Description
Transmitted Cells Number of (non-IDLE) ATM cells transmitted since start of link
Received Cells Number of (non-IDLE) ATM cells received since start of link
Delineation ATM delineation status: LOSS or GOOD. GOOD implies that
ATM Sync is achieved and maintained.
VPI Virtual Path Identifier field used in the ATM cell header
VCI Virtual Channel Identifier field used in the ATM cell header
HEC Number of received ATM cells with errors in the ATM cell header
since start of link.
Packet
Information Field Description
Transmitted Number of AAL5 packets transmitted s ince start of link
Received Number of AAL5 packets received since start of link
Total Loss Number of AAL5 packets received that are discarded (due to CRC
errors and oversize)
Loss % Percentage of AAL5 packets received that are discarded
CRC Number of A AL5 packets with checksum errors
Oversized Number of oversized packets received
The Configuration Window allows users to change the modem configuration information.
For configuration changes to take effect, the USB modem is required to unplug and plug
back from the USB cable (or simply reboot the PC).