SPECIFICATIONS
Power Supply: 12V, 3A
Main Relay: 12V, 5A
Operating Temp: -18
C to +70
C (0
F to +158
F)
Power Consumption: 15 mA unloaded, 1.5A Maximum
Revision 10/3/2018
Enclosure: Steel enclosure (12
12
4
) with supplied hinged lid, lock, and keys.
Typical Components:
Steel Enclosure
Controller Board
Power Supply w/integrated battery charger
Backup Battery (12 volt, lead/gel type)
Keypad with integrated lower iButton reader
Installation fasteners and keypad installation tool
Customer selected electric or magnetic locking device
Optional exit switch (REX) and 2
nd
iButton only reader
Controller Diagram:
(PCB = 84mm wide x 70mm high x 19mm thick)
PCB Jumper J2 = Same as REX on barrier strip pg. 1
Eternity-EDC700 Series Door Controller
Optional DCIBRD reader
2
nd
iButton reader –
Green
2
nd
iButton reader –
Orange
2
nd
iButton reader –
Blue
Customer supplied exit device
Exit Switch (REX)
To 12 Volt PSU
To Controlled Door Lock
Brown
Orange
Green
Red
Main
Reader/Keypad
Color Codes
N
ormally
C
losed (
NC
)
N
ormally
O
pen (
NO
)
Summary of Contents for Eternity EDC700 Series
Page 5: ...Notes pg 5 ...
