17
If you do not want to set an alarm, press
SET button
to skip this
step.
If you want to turn off an alarm, find the alarm number by pressing
SET button
in the setting mode, press
M button
to change from
“
ON
’ to “
OFF
”.
At the time of your alarm, the meter will beep and automatically turn
on. You can press
M button
to silence the alarm and insert a test
strip to begin testing. If you do not press
M button
, the meter will
beep for 2 minutes then switch off. If you do not want to test at this
time, press
M button
to switch off the meter.
Congratulations! You have completed all settings!
These parameters can
ONLY be changed
in the setting mode.
If the meter is idle for 3 minutes during the setting mode, it will
switch off automatically.
NOTE
