Connections
P/N: 001286, Rev. B
11
Connections
You can provide power to the Fusion 50 by either using the power
adapter (included) or through an Ethernet cable (not included)
connection that utilizes power-sourcing equipment (PSE).
Connecting the Power Cable to the Fusion 50
Do the following to connect the power cable to the Fusion 50:
1.
Connect one end of the power cable (included) to the power
outlet of the Fusion 50 Access Point.
2.
Connect the other end of the cable to an AC power outlet.
The Power LED turns green as soon as power is applied.
Connecting the Ethernet Cable to the Fusion 50
Note:
If you intend to use an Ethernet connection for power, make sure that the
connecting device is Power over Ethernet (PoE) IEEE compliant.
Do the following to connect an Ethernet cable to the Fusion 50:
1.
Connect a RJ45 Ethernet (straight-through) cable to the LAN
port of the Fusion 50.
2.
Connect the other end of the cable to a hub or switch.
The 11g LED flashes green when a LAN connection
establishes.