- 16 -
4. Standalone Mode Programming Guide
It is recommended to use the U-tec App to program your lock. If you don’t have a smartphone
or don’t want to use the App, you may follow the programming instructions below.
4.1 Create an Owner
Activate the Lock
Factory Default Mode, please set
up the lock with your smartphone
Press and hold
Operation
Voice Message
Enter a 4-8 Digit Code then
Re-enter the Digit Code then
Please enter a 4-8 digit admin code
and press the Enter key to continue
Please enter your code again
and press the Enter key to continue
Registered
for 3 sec
Creating the Owner must be the first step prior to any other programming.
Only one Owner is available.
Warning
Standalone Mode is NOT available after the lock is registered in
App! Please reset the lock to Factory Default Mode first to
program your lock in Standalone Mode.
ENGLISH
