For questions or concerns, email: [email protected]
3
This machine should only be operated by adults who have read and fully
understood this manual.
Always make sure the machine is grounded.
Keep the area around the machine clean and free of debris.
Place the heater on a stable and level surface.
Only use original parts from the manufacturer to ensure your safety and the best
product performance.
Do not touch any of the electrical connections while the machine is plugged in or
turned on to avoid risk of electrocution.
The heater is designed to be used in an industrial environment with an ambient
temperature of 1-45°C (34-113°F).
Make sure that the coil is properly fitted with an insulation sleeve to limit sparks
and the risk of fire.
Turn off and unplug the machine when making any adjustments, repairs, or
when storing the machine.
Remove all metal from your hands and arms when operating this machine,
including rings and watches. Metal may heat up if exposed to the coil and could
lead to serious bodily injury.
Place heated materials in a safe place after heating to avoid fire or injury.
Since the induction heater generates a magnetic field, anyone with a
pacemaker
or other medical device should not work or be in the immediate vicinity of the
device. Other sensitive equipment, such as wrist watches, magnetic carriers, or
electronic circuits, might also be affected. A safe minimum distance of 0.5
meters (20”) is recommended.
Circulating cooling water: High-quality circulating cooling water can expand the
life of the high-frequency induction heater. Poor water quality may cause rust,
scrap, and blockage inside the equipment, which will damage the machine. The
following water is recommended (in order of priority): distilled water, softened
water, pure water, filtered water.
III. Safety Instructions
