U.S. Solid USS-DBS86, Instruction Manual

Page: 10 / 16

8
Operation
5.1 Basic Weighing
1. Zero the balance in the no-load state.
2. Open the glass door of the weighing chamber and place the weighing
sample on the weighing pan, then close the glass door.
3. After the display stabilizes, read the value displayed.
Weighing a sample that needs to be in a container:
1. Open the glass door of the weighing chamber and place the weighing
container on the weighing pan, then close the glass door again.
2. Wait for the display to stabilize. Then press “ O/T ” to tare, and the
displayed value will return to zero.
3. Open the glass door and place the sample(s) to be weighed in the
weighing container, then close the glass door.
4. After the display stabilizes, read the value displayed.