U.S. Solid 1004, Instruction Manual

Page: 12 / 14

sensitivity setting
press and hold“ON”button under weighing interface, the balance enter
s
into the main menu mode.
release“ON”button un
til
the
display shows “SET-A”,
press and hold“PRINT”to enter into sensitivity setting, display shows “-ASD-*-”.
press and hold“PRINT”to set up sensitivity, the display shows.
highest sensitivity high sensitivity
medium sensitivity
REMARK:
factory setting sensitivity “-ASD-3-”, suitable for most using environment.
Higher sensitivityÿrequired better environment. Do not adjust the sensitivity
without consulting the factory.
Filter level setting
press and hold“ON”button under weighing interface, the balance enter
s
into the main menu mode.
release“ON”button un
til
the
display shows “SET-1”,
press and hold“PRINT”button to enter into filter level setting
,
the display shows“-Int-
*-”. press and hold“PRINT”button to set up filter level, the display shows:
filter level highest
filter level high
filter level medium
REMARK:
filter level is the internal calculating time of balance, factory setting
is “-Int-2-“, do not change
it
by yourself without professional instruction.
press“TARE”to save the setting and exit.
press“TARE”to save the setting and exit.
4. OPERATION
filter level low