background image

A-4 / ENGLISH

A-4

 - FORM NO. 56091021 - PEX 500-C-TICK

IMPORTANT SAFETY INSTRUCTIONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and of

fi

 ces 

other than normal residential housekeeping purposes.
When using any electrical appliance, basic precautions should always be followed, including the following:

  NOTE

: Read all instructions before using this machine.

 WARNING!

To reduce the risk of 

fi

 re, electric shock, or injury:

  This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack 

of experience and knowledge.

  Do not leave the machine unattended when it is plugged in.  Unplug the unit from the outlet when; not in use, before cleaning the

machine, prior to servicing or performing any maintenance on the machine, and when replacing parts or converting the machine 
to another function.

  To avoid electric shock, do not expose to rain or snow.  Store and use machine indoors only, store in a heated location.  Do not

let the machine or wand freeze.

  Do not allow to be used as a toy.  Close attention is necessary when used near children.

•  High pressure cleaners shall not be used by children or untrained personnel.

  Use only as described in this manual.  Use only the manufacturer’s recommended attachments.

  Never add water over 130º F/54º C to the solution tank.

Always use a defoamer when foaming occurs to prevent vacuum motor damage.

Do not let the pump run dry.

  Do not use with damaged cord or plug.  If the machine is not working as it should, has been dropped, damaged, left outdoors or

dropped into water, return it to a service center.

  Turn off all controls before unplugging.

  Do not pull by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners.  Do

not run the machine over the cord.  Keep the cord away from heated surfaces. To unplug, grasp the plug, not the cord.

  Do not handle the plug, the cord or the machine with wet hands.

  Extension cords must be 12/3 and no longer than 50 feet.  Replace the cord or unplug immediately if the ground prong becomes 

damaged.

  Connect to a properly grounded outlet only.

  Do not put any object into openings.  Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may

reduce air 

fl

 ow.

  Keep loose clothing, hair, 

fi

 ngers, and all parts of body away from openings and moving parts.

  Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes, or any health endangering dusts.

Do not use to pick up 

fl

 ammable or combustible liquids such as gasoline or use in areas where they may be present.

•  Risk of explosion – Do not spray 

fl

 ammable liquids.

  Use extra care when cleaning on stairs.

•  Wear gloves or use rags when removing quick disconnects to prevent burns.

  Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure, or chemical content.

•  High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or

the machine itself.

•  Do not use the machine within range of persons unless they wear protective clothing.
•  Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
•  High pressure hoses, 

fi

 ttings and couplings are important for the safety of the machine.  Use only hoses, 

fi

 ttings and couplings 

recommended by the manufacturer.

•  To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
•  Water that has 

fl

 own through back

fl

 ow preventers is considered to be non-potable.

•  Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure 

hoses, trigger gun.

revised 7/12

Summary of Contents for 56113001





























Reviews: