U.S. Products 100-041-016, Operator'S Manual

Page: 29 / 58

23 - Express 12 gallon Multi surface cleaner - operator and parts Manual
MacHinE MaintEnancE
To keep the Express in good working condition, simply follow the machine’s daily, weekly
and monthly maintenance procedures.
When servicing the machine, unplug the cord from the wall outlet. Failure to do
so can result in injury or death caused by electrical shock.
daILy maIntEnanCE (EVEry 4 Hours of
oPEratIon)
Empty and rinse out the recovery tank 1.
thoroughly.
Remove the float shut-off screen from the 2.
recovery tank and clean (see Figure 19).
When the solution tank is empty, remove
3.
and clean the solution filter screen located
at the end of the hose inside the solution
tank.
When replacing the solution filter screen , be
certain the filter screen lies in the recessed
pocket at bottom of the tank. This will assure
that all the solution is accessed from the tank
the next time the machine is powered on.
Wipe the power cord and check for damage; 4.
replace if necessary. Coil the cord neatly
after use.
Clean the exterior of the machine with an
5.
all-purpose cleaner and damp cloth.
Remove any accumulated debris on the
6.
gear box shaft and inside the threaded portion of the hub (see Figure 18).
An accumulation of debris around the gear box shaft, if not removed, may
damage the gear box oil seal resulting in loss of oil in the gear box. If the gear
box is operated without oil, severe damage may occur. (Repairing the Express
requires removing the cleaning head, described in the Repair Guide Section of
this manual, starting on page 27.)
remove debris on gear figure 18.
Box shaft and Inside threaded
Portion of Hub
remove screen figure 19.
and Clean