![background image](http://html1.mh-extra.com/html/u-s-general/95904/95904_operating-instructions_3095315003.webp)
SKU 95904
For technical questions, please call 1-800-444-3353.
Page 3
affect proper operation. Any part that is damaged should be replaced or properly re-
paired by a qualified technician.
Replacement parts.
When servicing, use only identical replacement parts. Use of
any other parts will void the warranty.
do not operate tool if under the influence of alcohol or drugs.
Read warning la-
bels if taking prescription medicine to determine whether judgment or reflexes might
be impaired. If there is any doubt, do not operate the tool.
This Accessory Kit is for handheld grease guns only.
Grease is extremely flammable.
Do not use grease around hot engines, mufflers,
flames, or any other heat source.
don’t use a grease gun on moving or operating components.
Do not use the
grease gun on tools that are plugged into a power source.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure all parts are included. If any parts are missing
or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon
as possible.
OPERATION
Note:
Each of the accessories below are used with a grease gun that accepts Zerk fittings.
To attach any accessory to a grease gun, slide the cover back and snap the Zerk fitting
into the coupling.
The 12” Hose Extension (1) provides additional reach when needed.
The 90 Degree Attachment (2) makes it easy to contact hard-to-reach fittings.
Straight Extension is used (3) to lubricate recessed fittings.
The 90 Degree Coupler (4) locks onto fittings that traditional couplers can not ac-
cess.
The Rubber Tripod Nozzle (5) is used to lubricate grease plugs, spindles, and capped
lube ports.
The Needle Injector (6) is used to inject grease into hydraulic fittings and CV-Joint
Boots.
8.
9.
10.
11.
12.
1.
2.
3.
4.
5.
6.
7.