SKU 93362
For technical questions please call 1-800-444-3353
Page 4
Assembly
This item must be assembled before use.
1.
Attach the vertical Post (2) to the Base (1) using two sets of Bolt, Nut and
Washer (7), as shown in the Assembly Diagram and in the photo below.
Tighten all fasteners firmly.
Post, Base and Step assembly
as seen from underneath.
Base (1)
Post (2)
Step (10)
2.
Attach Step (10) to the Post (2) using
two sets Bolt, Nut, Washer (8) as
shown in the photo above. Tighten all
fasteners firmly.
3.
Slide the Top Post (3) over the Post (2).
Secure the Top Post in place with the
Pin (5) and Cotter Pin (9). See photo at
right.
4.
The Top Post, with its Chest Rest (11), may be adjusted up or down, by
removing the Cotter Pin (9) and Pin (5), moving the Top Post to the desired
height, and reinserting the Pin and Cotter Pin.
Top Post (2)
Pin (5)
Cotter Pin (9)
Top Post and Step assembly with
Pin and Cotter Pin.
