Page 7
For technical questions, please call 1-888-866-5797.
Roller Cabinet
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Empty all Drawers.
2. Close all Drawers and lock them.
3. Unlock Swivel Casters.
4. Roll Cabinet to a flat, level, hard and smooth
surface capable of safely supporting a fully
loaded Cabinet. Do not roll Cabinet over concrete
seams or other rough/uneven surfaces.
5. Lock Swivel Casters.
Note:
All Drawers have safety latches
under right ends of Drawer Handles.
6. Connect SJTOW Power Cord to a properly
grounded, GFCI-protected 120VAC outlet. Keep
Power Cord off the ground to prevent damage.
WARNING!
To prevent serious injury from electric shock
and fire, ensure all cords are positioned where they will
not be pinched or cut by Drawer or Caster movement.
Keep Power Cord off the ground to prevent damage.
7. Plug devices into the Power Strip inside Drawer
on the right-hand side. Turn switch on.
Power
Strip
Switch
8. Unlock Drawers, and fill Cabinet evenly, from
bottom to top. Do not exceed weight capacities.
9. If the power to the outlets turns off,
check the following:
a. Check that switch has not been bumped to the
off position. Turn the switch off and on again.
b. Unplug Cabinet’s power cord from the wall.
Check that all device cords are
undamaged and not pinched.
c. If circuit breaker keeps tripping, check that
Power Strip’s amp rating is not exceeded and
all attached devices are working properly.
