background image

Page 3

For technical questions, please call 1-888-866-5797.

Roller Cabinet

17. To reduce the risk of electric shock or fire, 

never overload receptacles. Refer to markings 

for the proper load on receptacles.

18. To reduce the risk of electric shock, do not 

use on wet surfaces or expose to rain.

19. To reduce the risk of fire, do not use the 

power strip in the vicinity of open containers 

of flammable liquids (gasoline).

20. Do not use the equipment with a damaged cord or if 

the equipment has been dropped or damaged – until 

it has been examined by a qualified service person.

21. Use as intended only.

22. Inspect before every use;  

do not use if parts are loose or damaged.

23. Maintain product labels and nameplates.  

These carry important safety information.  

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

24. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.  

In addition, people with pacemakers should: 

• Avoid operating alone. 

• Properly maintain and inspect to avoid 

electrical shock. 

• Properly ground power cord.  

Ground Fault Circuit Interrupter (GFCI) 

should also be implemented – it prevents 

sustained electrical shock.

25. Keep hair, loose clothing, fingers, and all 

parts of body away from moving parts.

26. Use only as described in this manual. Use only 

manufacturer’s recommended attachments.

27. ALWAYS WEAR SAFETY GLASSES. Everyday 

eyeglasses only have impact resistant 

lenses, they are not safety glasses.

28. To reduce the risk of injury, close 

supervision is necessary when this 

product will be used around children.

29. To reduce the risk of injury, never overload the 

drawers or shelves. Refer to loading instructions.

 SAVE THESE INSTRUCTIONS.

Summary of Contents for 70381













Reviews: