SKU 66786
for technical questions, please call 1-800-444-3353.
Page 5
Know and obey city and state laws
5.
for proper disposal of oil. Dispose of
oil properly in accordance with all lo-
cal laws and regulations.
WaRning!
6.
The Oil Lift is to be used
only for transporting oil. Do not use
to transport any other liquid.
Do not leave Oil Lift unattended while
7.
operating or while evacuating oil.
Do not use this equipment near open
8.
flame or heat sources.
Always raise Bowl (1) and close Ball
9.
Valve (6) before evacuating oil. Nev-
er attempt to pressurize the Tank with
the Ball Valve open.
If the Safety Valve ever relieves any
10.
air pressure from the Tank, remove
the unit from service immediately and
contact a qualified service technician.
If used oil does not evacuate the
11.
Tank (23) upon pressurization, check
to make sure the Ball Valve (6) is fully
closed with the Handle (10) in the
horizontal position. If this does not
correct the problem, remove the unit
from service immediately and con-
tact a qualified service technician for
repair.
WARNING: The brass components
12.
of this product contain lead, a chemi-
cal known to the State of California
to cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5,
et seq.
)
Only use with accessories rated to
13.
handle the forces exerted by this tool
during operation. Other accessories
not designed for the forces gener-
ated may break and forcefully launch
pieces.
Attach all accessories properly to the
14.
tool before connecting the air sup-
ply. A loose accessory may detach or
break during operation.
Obey the manual for the air compres-
15.
sor used to power this tool.
Install an in-line shutoff valve to allow
16.
immediate control over the air supply
in an emergency, even if a hose is
ruptured.
Do not lay the tool down until it has
17.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
Do not smoke during use of this prod-
18.
uct.
Grip tool as lightly as possible (while
19.
still keeping safe control of it). Let
the tool do the work.
If any abnormal vibration occurs, stop
20.
use immediately.
SaVE THESE
inSTRucTionS.
