background image

VACUUM PUMP

2-STAGE - 9 CFM

66467

SET UP And OPErATinG inSTrUCTiOnS

distributed exclusively by Harbor Freight Tools

®

.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

 read this material before using this product. 

Failure to do so can result in serious injury. 

SAVE THiS MAnUAl.

Copyright

©

 2009 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or any artwork 

contained  herein  may  be  reproduced  in  any  shape  or  form  without  the  express  written  consent  of 

Harbor Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements,  actual  product  may  differ  slightly  from  the  product  described  herein.   Tools  required  for 

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

WArninG

To prevent explosion, serious injury, and 

death:

Service of air conditioning systems must 

• 

be done only by trained and experienced 

technician to avoid overfilling.

Technicians opening refrigeration circuit 

• 

in automotive air conditioning systems 

MUST be certified in refrigerant recovery 

and recycling procedures in compliance 

with section 609 of Clean Air Act 

Amendments of 1990. 

For additional information regarding ozone 

depletion and air conditioning service 

regulations, visit EPA’s website: 

www.epa.gov/ozone

Summary of Contents for 66467















Reviews: