Page 2
For technical questions, please call 1-800-444-3353.
SKU 5469
iMPORtANt SAFetY
iNStRUctiONS!
Read all instRuctions befoRe
using this pRoduct!
the Operator
COMMON SENSE and CAUTION are
factors which cannot be built into any product.
These factors must be supplied by the
operator. Please remember:
Stay alert. Never operate equipment if
1.
you are tired.
Do not operate the product if under the
2.
influence of alcohol or drugs. Read
warning labels on prescriptions to
determine if your judgment/reflexes
might be impaired.
Do not wear loose clothing or jewelry as
3.
they can be caught in moving parts.
Non-skid footwear is recommended.
4.
Wear restrictive hair covering to contain
5.
long hair.
Use ANSI-approved eye protection.
6.
Keep proper footing and balance at all
7.
times.
Work Area
To avoid risk of personal injury,
equipment damage, fire and shock make sure
your WORK AREA is:
Free of damp, wet or rainy conditions
1.
Free of children
2.
(never let them handle machinery)
Well-lit
3.
Clean and uncluttered
4.
Operation
Do not try to use inappropriate
1.
attachments in an attempt to exceed the
tool’s capacity. Approved accessories are
available from Harbor Freight Tools.
Never force the tool or attachment to do
2.
the work of a larger industrial tool.
Check for damaged parts. Before using
3.
any tool, any part that appears damaged
should be carefully checked to determine
that it will operate properly and perform
its intended function.
Check for alignment and binding of all
4.
moving parts, broken parts or mounting
fixtures and any other condition that may
affect proper operation. Any part that is
damaged should be properly repaired or
replaced by a qualified technician.
if there is any question about a
condition being safe or unsafe,
DO NOt operate the tool.
THANK YOU for choosing a H
ARBOR
F
REIGHT
T
OOLS
product! For future reference,
please complete the owner’s record below:
Serial No. ____________
Purchase Date ________________
SAVE THE RECEIPT, WARRANTY AND THESE
INSTRUCTIONS. It is important that you read
the entire manual to become familiar with the unit
BEFORE you begin assembly.
Product Use:
The Slide Hammer comes
with a complete set of pullers for light
duty pulls such as: bushings, seals,
sleeves, bearings, bronze or oilite
bushings, small dents or jammed bolts.
Storage:
Disassemble the Slide Hammer
set after each use. Put all pieces back
in the carrying case provided and store
in box to ensure that no pieces are lost.
KEEP OUT OF REACH OF CHILDREN.
